HVAC Insrallation

Air Condicioning Installation

The comfort of your home is our priority
Book now
Air Condicioning Installation

Air Conditioning Installation:

SAMSUNG, MITSUBISHI ELECTRIC, LG, DAIKIN, HITACHI, TOSHIBA, GREE, MCQUAY, SOFU, FUNAI,CARRIER, YORK NEOCLIMA, SHARP, PANASONIC, ELECTROLUX, FUJI ELECTRIC, FUJITSU, GENERAL, HAIER, MIDEA, SANYO, MITSUBISHI HEAVY and all other brands in SanFrancisco Bay Area.  

Best prices and short terms!

 A lot of people want comfort in their lives. Especially important in the San Francisco Bay Area is fresh air and coolness in the home.If your home doesn't already have an air conditioning system, or if it's outdated or needs to be replaced, our experts can help you find the best option for cooling your home or commercial space.  We will provide high-quality residential and commercial air conditioning installation services in theSan-Francisco Bay Area.Your new air conditioning system will make your life better and more comfortable

 If you need to install a new air conditioner or replace an old one, leave a Requisition Form or call +1(510)342 80 96. Our air conditioning specialist will come at your convenience to install your new air conditioner or replace your old one. We do the installation of all known brands of air conditioners.

We will do everything quickly and with high quality!  

 Depending on the type of your home and the type of air conditioning unit, there are different options for installing an air conditioning unit:

 

Standard installation

Air Conditioning Installation San  Francisco Bay Area
AC Standard Installation

This type of installation is chosen when the air-conditioner has to be installed quickly without damaging the walls and finishes.

"Standard" installation involves 3 metres of pipe:cable, insulator, drainage, one hole, hanging the indoor and outdoor units onK1 brackets.

The outdoor unit is placed on the façade of the building, the drainage hose is routed outwards and the condensate will drip down parallel to the wall of the building. The "standard" version involves hanging the outdoor unit on brackets directly under the window. If the outdoor unit does not pass through an open window or if the outdoor unit must be positioned away from the window (or on a building wall without windows), the cost of external work on the façade (climber, hoist, etc.) is added to the"Standard" installation cost.

 

Installation with a concealed line

(Drainage to the outside).

Air Conditioning Installation San  Francisco Bay Area
Installation with a concealed line

This type of air conditioning installation is fundamentally different from the "Standard" variant in that all the connections are hidden in the wall, or the plasterboard treatment of the wall.

The whole work is divided into 2 stages

The first stage: after coordination with the customer of the location of the internal and external unit, the drilling (if the walls will not be covered with plasterboard), conclusion of communications in the hole, installation of the external unit, pressurization of the system.

On the second stage (after all civil and finishing works):installation of the internal block, starting-up the split-system. As a result:only the indoor unit of the air-conditioner is added to the interior of the room, and the outdoor unit is placed on the façade (under the window).

Installation with concealed duct

(Drainage is led down the drain).

Air Conditioning Installation San  Francisco Bay Area
Installation with concealed duct

This type of installation is ideal in every respect. It takes a considerable amount of time and requires post-installation finishing, but only this type of installation allows you to fully integrate the split system into your home.

"Correct" installation means hiding absolutely all communications. As a result: the room block is situated in a comfortable place, only the outer block is put in front of the building or in a specially allocated place, and the system of freon pipes, the electric cable and drainage are hidden. The drainage is led in a general sewerage system (with obligatory observance of a slope, if the slope is impossible to provide, the drainage pump is installed), the electro cable - directly in the house power supply system, the freon line goes inside walls.

For "correct" installation, the specialists prove the drainage to the sewer riser at the first stage of installation. The connection to the riser pipe is made by the customer's means and by specialists from the plumbing trade. It should be noted that the drainage system is unpressurised and gravity drainage. (The customer must ensure that the connection is made through a special device, a water trap, in the form of a siphon. If the drainage is connected to the storm drainage riser, a non-return valve must be installed in addition to the siphon).

To achieve all the above mentioned points one should start planning installation scheme of a split system at the earliest stage of repair works, even to the drawing up of a design project. Only engineer, not designer can determine right place for installation of air conditioner to comply with above mentioned points.

 

Installations on lower floors

Air Conditioning Installation San  Francisco Bay Area
Installations on lower floors

This type of installation is used when installing air conditioners on the lower floors of a building, in offices, shops, cottages and country houses, etc. Peculiarity of this type of installation is that outside unit is installed not from the window, but "from the ground", even if the sizes of window panes allow this. In order to avoid locating the refrigerant circuit on the facade, the outside units are raised almost to the level of the room unit. It is worth noting that only if the room unit is located on the inside of the exterior wall, there is no need to hide the communications with a 6 x 6 cm plastic duct. However, a 1.6 x 1.6 cm cable duct, which carries the electrical cables, will still complement your interior.In principle, the indoor unit can be placed anywhere (not necessarily on an outside wall), but in this case a 6x6cm plastic box will appear in the interior decoration. The maximum lifting height of the external unit is 6m, unless special equipment or a climber is used.

The weight limit of the external unit is 60 kg. based on the manual lifting method.

External threats such as vandals and icicles falling from the roof must not be forgotten. The unit can be protected from vandals with a vandal resistant grille. If the building has a pitched roof, a protective roof can protect it from objects falling from above. With a vandal-proof grille, the canopy is no longer needed.

Multi-split system installation.

Air Conditioning Installation San  Francisco Bay Area
Multi-split system installation.

This type of air conditioning installation can be carried out in any of the installation variants described above.

The fundamental difference is that there are up to 5 indoor units per outdoor unit.

The challenge is to choose the best location for the specific room, where the external and internal units are located.

The standard installation process for a split system air conditioner includes the following steps:

1.Drilling a hole in the wall for the freon line

2. Mounting the outdoor unit of the air conditioner

3. Installation of the freon line up to 3 m.

4. Installation of drainage system

5. Installation of the indoor unit of the air-conditioner

6. Installation of electrical connections

7. Vacuuming of the freon line, pressure test (commissioning work)

8. Start-up of the air conditioning system (air conditioner)

 

HVAC All Seasons, has been installing, repairing &maintaining residential air conditioners and industrial air conditioning and ventilation systems in the San Francisco Bay Area for more than 12 years for heating and cooling. During this time, more than 1,000 pieces of air conditioning equipment have been installed.

 If you need to install a new air conditioner or replace an old one, leave a Requisition Form or call +1(510)342 80 96. Our air conditioning specialist will come at your convenience to install your new air conditioner or replace your old one. We do the installation of all known brands of air conditioners.

Price of installation of a home air-conditioning system

Standard installation of split type wall mounted air conditioner:
  • Room area 20-25 m2, trunk-line to 3m - from $
  • Room area 30-40 m2, trunk-line to 3m - from $
  • Room area 40-50 m2, trunk-line to 3m - from $
  • Room area 50-70 m2, trunk-line to 3m - from $
  • Room area 90-100 m2, trunk-line to 3m - from $
Installation of the wall-type split system on  ready trunk line:
  • Room area 20-25 m2 - from $
  • Room area 30-40 m2 - from $
  • Room area 40-50 m2 - from $
  • Room area 50-70 m2 - from $
  • Room area 90-100 m2 - from $
Fridge repair price

House Call

Call a technician at home to repair or install your equipment

Call The Master
Leave a request for a specialist on
1-510 3428096. Or fill in a form bellow

Our specialist clarifies the reason for the call and arranges a time for the technician to arrive at you.

Hose Call
Our specialist will come to your home
for an initial consultation and diagnosis.

We are available in the San Francisco Bay Area:
- San Francisco
- East Bay
- Peninsula
- South Bay

Service
The technician agrees on the entire list of work with the customer.

HVAC repair and installation services

Service Area

We provide services in the following Bay Area regions:

San-Francisco
East Bay
Peninsula
South Bay

HVAC All Seasons - Contacts

To request a service call, please fill out the form below

842 Los Padres Blvd, Santa Clara, CA, 95050
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.