It would be very bad if you were without a good heating system in the San Francisco Bay Area, during the cold season. If you don't follow simple rules for maintaining your heating system, your furnace can fail you at the most inopportune time.

Your heater needs periodic maintenance to work efficiently. Do not neglect this so that you do not have to deal with expensive repairs later. Your furnace, like your car, needs periodic maintenance. If your furnace has already happened to break down, try to have it repaired before the cold weather arrives.

We have been installing and repairing HVAC systems in homes and businesses in the San Francisco Bay Area for over 12 years. Leave a Requisition Form or call us: +1(510)342 80 96 Upon your call or request, HVAC All Seasons specialists will arrive at your convenience and perform all necessary work to keep your home warm and comfortable.

Repair & Maintenance Furnace in the San-Francisco Bay Area — Furnace Maintenance

How to maintain the Furnace

We often think that the appliances we have in our home are self-sufficient and can maintain themselves, that they are manufactured by a global brand name company and will function forever. The same goes for your furnace.

Your furnace can only function for a long time if it is well maintained in a timely manner. Your furnace, like your car, needs maintenance. Timely maintenance is what determines how long your car will run. It's the same with your furnace. There is a list of certain things that you need to do to keep your furnace functioning properly.

A list of furnace maintenance tasks:

- Only have the furnace checked and maintenance carried out by a specialist HVAC Repair & Maintenance company. Do this at least once a year. It is best to have it done before the cold weather arrives.

- Install a carbon monoxide detector in the right places.

- Change your furnace filter once every three months.

- Do a blower check and make sure there are no obstructions. Check the lubrication.

- An HVAC technician should do an inspection of the furnace ductwork.

- Inspect the inside of the furnace chamber. There must be no rust, damage or other defects.

- Flush the burners with water and remove dust and debris.

- Check the gauges and, if necessary, clean any dirt from them.

- Check the degree of heating of the heater so that it does not overheat.

- Check the fuel meter and the fuel flow diagram of the heater.

- Always keep the furnace area clean and ensure unobstructed access to the furnace.

Remember: Cleaning, regulation and diagnostics of the furnace, even once a year, can avoid costly repairs to the heating system. As a rule, repairs are carried out in wintertime, when not only the lack of hot water is an unnecessary factor, but also the possibility of freezing of the system, which entails highly annoying consequences.

Your Furnace Needs Repair

Furnace repair is a set of works to keep Furnace in working order and eliminate all probable breakdowns and interruptions that occur during operation.

Technologically, repair of any HVAC equipment is a time-consuming and serious procedure, often involving checking the entire heating system. Before it gets started, you need to estimate the size and complexity of the work to be done.

HVAC All Seasons will perform a full range of Furnace Repair, including maintenance and preventive maintenance, of any complexity in the SanFrancisco Bay Area area.

How can you identify if your furnace is working properly?

You may think that everything is working well and correctly. But one day your furnace may let you down and you'll be back in the cold rooms of your home. To prevent this from happening, you need to watch out for signs that may tell you that it's time to call a technician immediately.

Symptoms that may tell you that your furnace may be breaking down soon:

SPONTANEOUS SWITCHING OFF: The oven runs for at least 3 minutes after switching on and then switches itself off. If you notice this, call your technician immediately. This symptom indicates a defective heat exchanger or thermostat.

FLAMES ARE NOT FLOORED: The flame should be in a straight line in a properly working furnace. If the flame is uneven or if it tilts towards the back of the oven, you should call a master immediately. This indicates fouling of the burners, which in turn signals a serious breakdown - a cracked heat exchanger. If your furnace has a cracked heat exchanger you and your loved ones risk carbon monoxide poisoning.

OTHER ISSUES: If you hear loud or unusual noises from your furnace you should contact your furnace repair company immediately. This may signal a problem in the furnace that needs to be repaired.

We can help you troubleshoot the problem safely and expertly, thereby ensuring the smooth operation of your furnace.

For the successful operation of your furnace, it must be checked at the end of each season by a competent technician. High-quality service guarantees a long service life and economical operation of the system.

It is much better and safer to call us for an in-home repair service than to try to fix your furnace yourself. Our technician will fix all problems in a timely, high-quality and professional manner. Don't forget that furnace repair is a rather time-consuming process that requires engineering education and a lot of experience

We will repair your furnace quickly, efficiently and reliably. Leave a Requisition Form or call us: +1(510)342 80 96 for immediate service in the San Francisco Bay Area, CA.